Careers at SunMan Engineering, Inc.
Join the Team at SunMan Engineering, Inc.
COMPANY PROFILE:
Since 1990 , SunMan Engineering has provided engineering turnkey services from concept to manufacturing. Many customers come to us with their schematics in hand and look to us for PCB layout expertise, Fabrication, Kitting and Assembly, as well as Circuit Design (Digital/Analog), Design & Development of FPGA’s and CPLD’s, Product Development, and Prototyping.
SunMan assists product designers and R&D engineers with circuit designs (including FPGA’s and CPLD’s) and PCB layout and specializes in engineering tasks for electronic and mechanical applications. SunMan has developed an excellent reputation with large semiconductor, telecom, networking, biotech, research and development companies, and government agencies. The Company was establish in 1990 and has made impressive strides towards the goal of being the leader in Engineering Prototype Services.
For immediate consideration, please send your resume to:
SunMan Engineering, Inc.
Attention: Human Resources
1879 Lundy Ave Suite 236
San Jose, CA 95131
Please E-mail to: hr@SunManTechnology.com
Principals only. No phone calls please.
Currently we have openings in the following areas:
- Embedded Firmware Engineer
- DSP Software Engineer (Consultant)
- Senior FPGA Hardware Engineer
- Principal or Senior Electronic System Engineer
- HARDWARE ENGINEER
- SALES ENGINEER– PCB Prototype Services
- SALES ASSISTANT / TELEMARKETER
- SENIOR SIGNALS INTEGRITY ENGINEER
- PCB DESIGNER
- ELECTRICAL ENGINEER
- MECHANICAL ENGINEER (AUTOMATION)
” We are the Engineering Prototyping Specialists”
Company description – For more than a decade, SunMan Engineering has provided Engineering Turnkey Services from Concept to Prototyping. We are an electronics design company serving Fortune 500 and start up clients in Silicon Valley. Many companies come to us with their schematics in hand and look to us for Prototyping including PCB Design and Layout expertise, Fabrication, and Assembly, as well as Circuit Design (Digital / Analog), FPGA and CPLD Design and Product Development.
Embedded Firmware Engineer
SunMan Engineering is seeking an Embedded Firmware Engineer with experience in writing and debugging low-level firmware, hardware and drivers.
DUTIES AND RESPONSIBILITIES:
- Develop, system application middleware software, enhance and maintain low-level boot loader, and device driver.
- Work with hardware teams on board bring-up.
- Support diagnostics and device operations.
- Interface with various hardware and software vendors on complex system integration tasks to achieve efficient, cost-effective and delightful product solutions.
REQUIRED SKILLS AND EXPERIENCE:
- A bachelors degree or career experience in computer science or computer engineering is preferred.
- Experience with RS232, USB, TCP/IP, and HTTP protocols. Experience with RS485, Modbus, SPI a plus
- Experience with cellular, and other wireless communication protocols required.
- Experience with writing to and reading from NAND Flash RAM
- Experience with BOTH C and C++ programming in 8, 16 and 32-bit embedded environments.
- Experience with ARM microprocessors. Experience with embedded Linux systems a plus.
- Extensive experience with software Engineering processes and tools
- Experience developing software for embedded or mobile applications with limited computing resources
- Experience and comfort with lab tools such as debuggers, logic analyzers and oscilloscopes.
- Strong communication and self and project management skills.
- Thinks outside the box when developing solutions
- Excellent written and verbal communication skills
- A passion for creating and building things.
- Must be able to successfully pass a pre-employment background screen.
- If work is satisfactory, many more projects ahead!
DSP Software Engineer (Consultant)
SunMan Engineering is seeking a experienced DSP Software Engineer to lead our Firmware development for our product development projects.The Ideal candidate will have the following skillsets:
- DSP SW design and integration for TI TMS320C553X family of DSP Chips
- Skill in signal processing, especially in voice processing and FFT.
- Candidate must have Experience with TMS320
- Experience prototyping hardware with the ezDSP5535 kit
- Work with prototype HW, board bring up and testing using JTAG EMU
- System SW design including implementation of FAT16 file system
- C for embedded systems
Senior FPGA Hardware Engineer
Successful candidate will participate as a team member in the development of products in the automotive/infotainment/wireless/mulimedia application space. We are looking for highly intelligent, hardworking, and creative individuals that can adapt to evolving leading edge technologies. We are looking for individuals who can adapt reference design work, can adapt open source code, or design products from scratch in a short amount of time.
REQUIRED SKILLS :
- Verilog & VHDL RTL and Testbench design
- Xilinx ISE Design Flow
- MicroBlaze / PicoBlaze soft-core processor configuration
- Digital Signal Processing Design, Techniques, and Theory
- Sample Rate Conversion / FIR & IIR Filter design
- Matlab / Simulink Experience
- Xilinx Sysgen with extensions to signal processing
- PCB schematic design using OrCAD
- State Machine Theory
- Asynchronous and multiple clock domains
- PLL / Frequency synthesis experience
DESIREABLE SKILLS:
- Experience with PIC microchip firmware development
- C/C++
- JTAG
- Analog Design (DC-DC chips, op amps, transistors, etc.)
- Various hardware protocols: I2C, SPI, RS232, etc.
- Interface with various sensors: acceleration, pressure, temperature, etc.
- GPS, GSM, CDMA
- CAN, LIN, MOST, APIX
- CATC, RF, Protocol analyzers and other laboratory equipment
- WiFi, WiMAX, 3G, 4G
- Embedded programming experience
- Windows 802.11 & USB driver experience
- Experience with Windows USB core and USB protocol
- Familiar with embedded programming on Cypress USB devices
- Experience developing driver stacks for bus-connected PC devices(USB/ PCI/ PCI Express)
- Proficiency with windows kernel-mode development and debugging.
EDUCATION AND EXPERIENCE
- BS, EE, CS, CE, or Equivalent
- 5-10 Years hands on experience
- Good communication skills
Principal or Senior Electronic System Engineer
SunMan engineering is looking for an experienced senior electronics engineer to lead product development.
This is a leadership position requiring someone who can be the center of technical competence, build and inspire the development team, and impress customers with technical excellence.
This is a ground floor opportunity offering a path to a leadership role in the company for an individual who is personally driven to succeed and is ready to take ownership of technical product development.
RESPONSIBILITIES:
Technical
- Defining and developing electronic products
- Architecture design
- System design
- Board level design
- Schematic creation
- Board level timing analysis and simulation
- Manage prototyping
- Manage integration of hardware, software and chip into a system
- Strong design background in Analog and Digital Circuits
- Providing technical assistance to customer engineering and production personnel
- Client technical interface
- Component specifications, sourcing and vendor interface
Leadership
- Participate and lead cross functional teams working on product definition and development
- Act as center of technical competence
- Take the lead in selecting vendors and components
- Project management
- Strong documentation skills
REQUIREMENTS:
- Design, development and test including high speed and analog design
- Embedded systems
- Micro controllers
- Digital signal processing
- Mixed signal
- Power management
- Familiar with precise analog layout theory and layout experience
- FPGA design a plus
- Experience in design, test, reliability and production phases
- Firmware development
- Board level design
- Designing A to D and D to A Converter circuits
- Strong background in wireless communications, experience with radio interfaces, lower level MAC hardware and wireless PHYS is highly desirable
- 3G/4G Networks (GPRS, EDGE, EVDO, HSDPA, WiFi, WiMesh, WiMax)
- Analog (RF) and digital integration
- Experience with wireless Ethernet designs/standards; for example 802.11 & 802.16
- Understanding of power amplifiers design is a plus
- Strong logic design, board level simulation, verification, timing and power analysis and systems board environment build experience a plus
- Hardware,/firmware in the area of wireless communications (Wireless LAN, wireless USB, Bluetooth, Ultra Wide Band) a plus
QUALIFICATIONS:
- MS or better in EE with emphasis on wireless design fields
- Proven track record of performance while meeting schedules
- Entrepreneurial mindset
- Leadership skills
- Ability to lead internal engineers and external consultants
- Experienced at working in fast moving and agile work environment
- Good communication and presentation skills
- Strong Documentation Skills
Hardware Engineer
Join SunMan Engineering, the engineering prototype and product development Specialists. For more than a decade, SunMan Engineering has provided engineering turnkey services from concept to manufacturing. Our expertise is in PCB layout, Circuit Design (Digital/Analog), Design & Development of FPGA’s and CPLD’s, Product Development, and Prototyping.
We are looking for a talented hardware design engineer to join our team.
RESPONSIBILITIES:
- Ability to transform design process from initial concept to prototyping and final product development
- Responsible for design and development of digital and analog hardware; circuit design and analysis using CAE tools; PCB layout; verification using lab instrumentation
- You will also Bring-up the prototypes and products in lab
- Prepare and maintain specifications
- Develop innovative circuits/solutions to meet these specifications
- FPGA based systems experience for consumer electronics products; have the ability to transform ideas into specifications, requirements, and product architecture would be a plus
This is an intermediate level technical position. This engineer works independently on non-routine and routine, defined projects involving well developed planning, time management and communication skills within established standards and with directions from superiors. Work would be assigned and general instructions given to routine work, detailed for non-routine and new projects.
Engineer exercises judgment within well-defined practices and policies; notifies appropriate individuals and managers as decisions are made; decisions typically involve workflow and time prioritization. Discusses and presents information and issues internally within the company. Communicates with management as a representative of a discipline or department.
REQUIREMENTS:
- BSEE/MSEE with 3-5 years of relevant experience in hardware design engineering
- Strong experience with Allegro, Cadence, PADS and Orcad design tools
- Experience in incorporating microprocessors and digital signal processors, high speed digital design and RF design
- Should have working knowledge of entire design process from customer input, schematic creation, parts list generation and purchase, PCB layout, FPGA, SI analysis etc
- Good communications skills needed to manage customer and vendor interactions
- Must have valid US work authorization
SALES ENGINEER– PCB Prototype Services
We’re looking for an energetic, enthusiastic sales professional who is a team player with a strong work ethic and positive attitude to join our expanding engineering prototype services company.
RESPONSIBILITIES:
- Generate new business and penetrate strategic accounts
- Develop winning technical sales strategies
- Manage all sales programs for an expanding company in a small team environment
- Locate prospects, forecast new business, and create a solid business plan for each account
- Structure the deal, negotiate and close sales
- Provide timely solutions to customer application issues in PCB Design
- Act as technical liaison between our customers and company staff members
- Support and act as a resource for new business development activities
- Take responsibility for sustaining applications for pre-sale and post-sale customer support
REQUIREMENTS:
- BSEE (or equivalent combination of technical education and experience)
- 2+ years of solid experience in both outside and inside sales of technical professional services
- Account management/project management experience in selling to electronic R&D customers mandatory
- Must have a proven track record of quota achievement
- Hands-on work experience in high tech industry with technical knowledge of PCB prototypes preferred
- Ability to travel 5-10% within U.S.
- Strong computer skills (Word, Excel, Access, PowerPoint, Act 4.0)
- Excellent written and verbal English communication skills and a high level of initiative are essential
- Must have valid US work authorization
SENIOR SIGNALS INTEGRITY ENGINEER
We are seeking a strong and versatile Senior Signal Integrity Engineer who has excellent experience with board level simulation. He/She will be involved with the board design and development effort through all phases including analysis, design, layout, simulation, prototype bring-up, test, complete design documentation, and release to manufacturing. He/ She is expected to understand signal integrity issues, board layout design rules and system-level software fundamentals Candidate should be a self-starter who thrives in fast-paced environments and employs creative problem solving to overcome engineering challenges.
REQUIREMENTS:
- BSEE or equivalent required. (MSEE preferred) · 10+ years¨ of industry experience with Board Post Simulation Level and high-speed circuit design, test, and integration, including Expertise in Cadence Spectra-Quest and Mentor Graphic Hyperlynx or XTK.
- Expert in IBIS Modeling.
- Expert in HSPICE Model Extraction.
- Familiar with DDR/QDR interfaces (chip-to-chip, SDRAM (DDR), SRAM (QDR).
- Simultaneous switching output analysis.
- Simulations of device I/O to reduce overshoot and undershoot (which can cause increased noise on power planes due to return currents).
- Crosstalk analysis of signals to reduce noise.
- Return current analysis for noise reduction.
- Proper transmission line impedance control.
- Lab measurements using oscilloscopes, spectrum analyzers, etc. for verification.
PCB DESIGNER
We’re looking for a PCB Designer professional who is a team player with a strong work ethic and positive attitude to join our expanding engineering prototype services company.
RESPONSIBLITIES:
- Designing PCB’s from the beginning stages through the completed output process.
- Perform PCB layout for digital and RF circuit boards; generate fabrication and assembly drawings.
- Interfacing with the project team
- Establish design standards, component libraries, and vendor processes.
- Work from preliminary schematics, part lists, and basic description of the board function, configuration, and arrangement as defined by engineering.
- Collaborate in developing state-of-the-art designs of new or modified high density printed circuit boards
REQUIREMENTS:
- 7-10 years PCB CAD experience is a must.
- Cadence Allegro/CCT design experience, mandatory
- Must be familiar with OrCad schematic capture and PADS layout
- In-depth knowledge of signal integrity, noise immunity, and agency compliance rules.
- Requires experience in the design of Electro-mechanical systems.
- Must be familiar with high-density surface mount devices.
- Knowledge of analog layout practices and mechanical design issues
- BSEE degree or equivalent experience in electrical mechanical design drafting.
- Must have valid U.S work authorization
- San Jose/Silicon Valley area residents only please. Sorry, no relocations available.
Principal or Senior Electronic System Engineer
Join the team at SunMan Engineering!
Since 1990, SunMan Engineering has provided engineering turnkey services from concept to manufacturing. Many customers come to us with their schematics in hand and look to us for PCB layout expertise, Fabrication, Kitting and Assembly, as well as Circuit Design (Digital/Analog), Design & Development of FPGA’s and CPLD’s, Product Development, and Prototyping.
SunMan engineering is looking for an experienced senior electronics engineer to lead product development. This is a leadership position requiring someone who can be the center of technical competence, build and inspire the development team, and impress customers with technical excellence.
This is a ground floor opportunity offering a path to a leadership role in the company for an individual who is personally driven to succeed and is ready to take ownership of technical product development.
Responsibilities
Technical
Defining and developing electronic products
- Architecture design
- System design
- Board level design
- Schematic creation
- Board level timing analysis and simulation
- Manage prototyping
Manage integration of hardware, software and chip into a system
- Strong design background in Analog and Digital Circuits
- Providing technical assistance to customer engineering and production personnel
Client technical interface
- Component specifications, sourcing and vendor interface
Leadership
Participate and lead cross functional teams working on product definition and development
Act as center of technical competence
Take the lead in selecting vendors and components
Project management
Strong documentation skills
Experience Requirements
- Design, development and test including high speed and analog design
- Embedded systems
- Micro controllers
- Digital signal processing
- Mixed signal
- Power management
- Familiar with precise analog layout theory and layout experience
- FPGA design a plus
- Experience in design, test, reliability and production phases
- Firmware development
- Board level design
Designing A to D and D to A Converter circuits
- Strong background in wireless communications, experience with radio interfaces, lower level MAC hardware and wireless PHYS is highly desirable
- 3G/4G Networks (GPRS, EDGE, EVDO, HSDPA, WiFi, WiMesh, WiMax)
- Analog (RF) and digital integration
- Experience with wireless Ethernet designs/standards; for example 802.11 & 802.16
- Understanding of power amplifiers design is a plus
- Strong logic design, board level simulation, verification, timing and power analysis and systems board environment build experience a plus
- Hardware/firmware in the area of wireless communications (Wireless LAN, wireless USB, Bluetooth, Ultra Wide Band) a plus
- At least 5 years experience with the last two years in a leadership role
Qualifications
MS or better in EE with emphasis on wireless design fields
Proven track record of performance while meeting schedules
Entrepreneurial mindset
Leadership skills
Ability to lead internal engineers and external consultants
Experienced at working in fast moving and agile work environment
Good communication and presentation skills
Strong Documentation Skills
Company description
SunMan engineering is an electronics design company serving Fortune 500 and start up clients in Silicon Valley.
ELECTRICAL ENGINEER
SunMan Engineering, Inc. in San Jose hiring Electrical Engineer. F/T. MS in EE. Email resumes to hr@SunManTechnology.com
MECHANICAL ENGINEER – AUTOMATION
SunMan Engineering Inc – San Jose CA
This position requires the following skills and attributes:
- BS degree in Mechanical Engineering.
- A minimum of 5 years of experience designing automated equipment, and or robotics.
- Experience creating detailed engineering drawings for fabrication and assembly.
- Knowledge of mechanical, pneumatic, and electrical devices commonly used in automation equipment.
- Knowledge of SolidWorks 3D modeling software.
- Hands on supervisory experience of building automated equipment, electro-mechanical equipment or mechanical prototype fixtures.
- Ability to work in a fast paced team environment.
Requirements
The following skills and attributes are preferred:
- Knowledge of 3D animation software for engineering.
- Experience with manufacturing processes.
- Prototyping Experience
Email resumes to hr@SunManTechnology.com